Model IR-2U-30T-120 is a surge suppression filter solution specially engineered for data center operations to shield uninterruptible power supplies (UPS) and connected rack-mounted equipment and sensitive electronics from dangerously high and damaging surge energy let-through. These power quality filters are designed to overcome the minimal surge protection found in most UPS units and deliver failure-free […]

Power Supply Tips

Zero Surge Inc. “FF1 Series” surge suppression for commercial and industrial applications integrate a patented filter system unlike others to provide unprecedented protection for one or multiple branch circuits. Using Spectrum WVR® (Wide Voltage Range) filter technology, the surges sense and suppress power line surges whether the power is low at 85 V, high at […]

Power Supply Tips

A global manufacturer of electrical protection solutions announces a performance improvement for its Strikesorb 40 SPD product line. The products protect vulnerable electronic equipment against electrical damage caused by overvoltage events and lightning strikes. The Maximum Impulse Current specification that the SPDs can withstand has been increased to 12.5 kA (10/350 μs) direct lightning, per […]

Windpower Engineering & Development

Weidmuller announces a DIN-rail mountable surge protection family, the SPD Series, with local and remote self-monitoring. The range includes seven SPD models, with accessories, for low voltage distribution and protection of industrial control systems, equipment, assemblies and devices. The power range, SPD II, is UL 1449 Edition 3 approved to protect A.C. single and multi-phase…

N-TRON Corporation expanded its fully-managed gigabit-capable 7026TX Series with the introduction of the 26-port 7026TX-AC rack-mounted switch. Like the 7026TX, released in March (2011), this switch is designed for installation in a 19″ open-frame rack or machine cabinet. Both models feature a flexible multiport design with twenty-four (24) 10/100BaseTX copper interfaces and two (2) gigabit…

N-TRON公司增加了一个新的多端口模型its fully-managed 7000 Series. The new 7026TX offers a powerful combination of twenty-four (24) 10/100BaseTX copper interfaces and two (2) gigabit expansion ports in a sleek 1U rackmount enclosure. The model was designed to provide maximum functionality in the small footprint of an open-frame or cabinet rack.…

Phoenix Contact’s CONTACTRON family of solid-state contactors now includes reversing and non-reversing contactors in a variety of amperages. The contactors can activate or reverse 1- to 18.5 kW-powered motors without wear or noise. The contactors are available in 2 amp, 9 amp, 15 amp and 37 amp versions, either reversing or non-reversing. Each is…

Newburyport, MA – Mersen, formerly Ferraz Shawmut, introduces its new X series line of UL 1449 third edition approved surge protection devices (SPDs), the Surge-Trap Type 1 X-Series, which provide overvoltage protection for all locations in the facility with the smallest footprints available. The new X-Series SPDs features industry leading TPMOV® technology inside. The…

Amberg, Germany – Phoenix Contact and TraceParts have announced that Phoenix Contact products due to go on show at Electronica 2010 will be made available in all the most popular native and neutral CAD formats at www.tracepartsonline.net. Phoenix Contact is among the global market leaders in connection technology between conductors and printed circuit boards,…

MIDDLETOWN, PA – Phoenix Contact’s VALVETRAB MS surge arresters protect photovoltaic systems up to 1000 V. The VAL-MS 1000DC/2+V-FM protects two-position DC voltage systems up to 1,000 volts. VALVETRAB MS is also available for other voltages commonly used in small-scale photovoltaic systems and power systems (12 V to 600 V DC). The rail-mountable arresters…

Mobile, AL – N-TRON Corporation announced the addition of six new models to its family of fully managed Industrial Ethernet switches. Housed in compact, hardened enclosures, the 709FX, 710FX2, 711FX3, 712FX4, 714FX6 and 7010TX were designed to provide maximum performance in harsh industrial environments. Product Highlights:• -40°C to 70°C Operating temperature• Rugged DIN-Rail Enclosure• ESD…

Mobile, AL — N-TRON Corporation, a global leader in Industrial Networking,today announced the newest addition to its family of fully managed Industrial Ethernet switches. Housed in a compact, hardened, extruded aluminum enclosure the all-Gigabit 7506GX2 is designed to provide maximum performance in harsh, high traffic applications such as security and video surveillance. The rugged 7506GX2…

Cincinnati, OH — The Industrial Automation Group of Advantech introduces two energy efficient Unmanaged Gigabit Ethernet switches, the EKI-2725-BE and EKI-2728-BE. These new models feature an energy efficient design, resulting in 10% to 15% power savings as compared to previous models and similar models on the market. These new switches are designed with a variety…

Cincinnati, OH — The Industrial Automation Group of Advantech introduces two new wide temperature models of its popular EKI series of Industrial Ethernet switches, the EKI-7629CI and EKI-7656CI. These new models join the growing line of wide operating temperature -40 to 167°C (-40 to 75°C) products, providing unparalleled reliability and performance for any network infrastructure.…

Acromag has released another BusWorks Ethernet I/O module to simplify the task of interfacing data from virtually any analog sensor to a Modbus TCP/IP control/monitoring system. The new 958EN model has 16 analog input channels and a quick-connect DB25 port to capture isolated and amplified sensor signals directly from a full panel of industry-standard 8B…

MIDDLETOWN, PA – Phoenix Contact now offers pre-assembled surge protection sets for the solar photovoltaic (PV) industry. The surge arresters in the PV sets have temperature-monitored, high-capacity varistors with optical fault warning and dynamic disconnect device. The PV sets are pre-assembled protection solutions in IP65 installation housing. The PV-SET DC and PV-SET Multistring offer surge…

Wixom, MI – Acromag has released a new analog input module for their EtherStax® series of rugged Ethernet I/O which features extremely high I/O density to further reduce cost per channel and save space. Designed for distributed I/O and SCADA applications, the ES2163 and ES2164 models perform 16-bit A/D conversion on up to 64 single-ended…

Acromag expands its line of BusWorks‚® Ethernet I/O modules for distributed I/O and SCADA with new 993EN and 994EN models providing a 16-channel 16-bit A/D interface for single-ended analog voltage or current input signals. The space-saving inch-wide units make it very easy to retrofit older control systems for Ethernet Modbus TCP/IP networking and greatly reduce…

Acromag’s newest RS-485-to-RS-485 network repeater device, Model 4683-TTM-3F, operates off 24V AC power to greatly reduce installation costs. Now you can extend your network or connect bus segments without expensive wiring requirements by using power supply transformers typically available in HVAC and building management systems. Designed for use with Johnson Controls N2 or BACnet MS/TP…

Acromag has expanded its BusWorks‚® Ethernet I/O series of modules for distributed I/O and SCADA with new 967EN and 968EN models providing an 8-channel interface for differential analog voltage or current input signals. Each model is available in industrial and commercial-grade versions starting at just $295 to greatly reduce costs for applications that do not…

Schneider Electric and its Square D® Critical Power Competency Center (CPCC) announced the release of a new white paper titled System Grounding and Ground-Fault Protection for Data Centers, available now as part of the Critical Power Technical Reference Repository on its Web site, www.criticalpowernow.com. The repository contains recently released and archived white papers and technical…

Ottawa, IL – Designing and manufacturing products for over 27 years, B&B Electronics Manufacturing Co., Inc. provides customers with total solutions for industrial automation and device networking. New industrial Ethernet to serial servers are just some of the new products featured in their latest catalog. Designed and manufactured by B&B Electronics, these servers boast an…

MIDDLETOWN, Pa. ‚– The new CONTACTRON 4-in-1 solid state reversing contactor from Phoenix Contact combines four functions in one narrow package. Designed for three-phase AC motors up to 4 kW/5 HP in size, the 4-in-1 provides forward, reverse, overload protection and redundant emergency stop contactor functionality in a 22.5 mm-wide module. The compact size reduces…

Ottawa, IL – B&B Electronics Manufacturing Co. Inc. provides customers with total solutions for industrial automation and device networking. Industrial Ethernet to serial servers are just some of the new products featured in their latest catalog. Designed and manufactured by B&B Electronics, these servers boast an extensive line-up of port configurations, including total fiber networking…

The Square D MD50 motor disconnect switch provides reliable, safe and quick power connections in industrial facilities, and prevents process interruption by cutting power to a motor if necessary while not affecting the main circuit. It makes it virtually impossible to plug in a power receptacle having different voltage and ampere ratings, while a mechanical interlock…