Supplied by The Bishop-Wisecarver Corporation
WBENC认证的妇女拥有的公司Bishop-Wisecarver Corporation（BWC），帮助制造商和自动化解决方案提供者工程师线性和旋转运动解决方案，今天宣布了其最新的旋转运动解决方案收集的最新添加：1-Trak，一件单一的零件轨道系统完全是无缝且自由运行的，在安装过程中没有可能未对准或服务，从而使运动更平稳，更安静。
尽管传统的轨道技术将轨道路径限制在直线和弯曲的轨道段的简单组合中，但1-Trak允许实现任何可疑的2D形状。
“This patent pending guided motion system is an innovative addition to our HepcoMotion® collection of rotary track options as it is now possible to specify any shape with no joints,” said Ali Jabbari, Vice President of Engineering at BWC. “The design can also include an integral base to form the structural part of a machine.”
整个轨道元件是由一块钢制成的，有或没有底板，并具有三轴轮板。设计的自然强度和准确性使其适合于机器的结构元素。可以使用孔，插槽和其他功能来定制产品，以消除为轨道系统设计单独的安装板所涉及的时间和成本，并可以提供安装在铝机框架上。
BWC产品经理Brian Burke说：“这是复杂和无连接运动形状的重大技术突破。”“马车在轨道的所有区域保持零游戏，并且由于轨道宽度可变，可以容纳非常紧的曲线半径。”
除了促进轨道配置的高度灵活性外，独特的三轴几何形状与轨道形状相结合，可确保车轮板在电路上到处显示零播放。与其他轨道相比，这是一个关键的好处，那里的轨道从直截面和弯曲部分之间的轨道“升降”。
The 1-Trak circuits can also accommodate much tighter bends than is possible with other systems, saving space and costs while allowing the manufacturer to optimize production layout.
Where the application involves higher moment loads the 1-Trak solution is also available in a wide track section. Wide slide sections with widely spaced bearings both across and along the wheel plate can also be supplied to create a very rigid platform and increased moment load capacity.
可以使用任何尺寸的VEE轮廓指南指定轨道系统，适合从广泛的肝PRT2或直径为13mm至150mm的重型HDS2范围内的轴承。车轮板可承载67至51,000 N的负载，并且轨道最多可达5.5 x 1m或1.9m平方。还可以提供耐腐蚀版本作为标准版本。
A rack and pinion driven wheel plate is another standard option when choosing 1-Trak. Its unique design permits a correct and constant mesh between pinion and rack around the entire circuit. It eliminates the need for the pinion to be sprung against the rack to compensate for varying engagement. This substantially simplifies the wheel plate design, reduces cost and dramatically increases system driving forces.
轨道上的齿轮齿进行了精确加工，表面硬化以提供出色的强度和耐用性。齿轮可从mod 1.5到mod 10及更高版本，具体取决于申请要求。系统设计人员可以单独指定小齿轮，配有齿轮和驱动法兰的轮板，或安装在变速箱齿轮齿轮电动机上的小齿轮。
Also within the new product range is the availability of rectangular flat track profiles and track roller wheel plates. This option is recommended for use when two track systems are mounted in parallel. It allows the roller bearings on one side to ‘float’ axially whilst the other side is fixed and captivated by the vee bearings. This type of configuration compensates for parallelism tolerances, and completely eliminates the excessive loading and binding that can occur.
Bishop-Wisecarver
www.bwc.com
提交以下：线性运动提示，，，，轴承
