AmaCoil/Uhing引入了Uhing RG线性驱动器的新选项，该选项可以极为精细地调整驱动器单元的线性音高。使用新的控制旋钮选项，可以在驱动器移动而不会改变电动机速度时调整音高。也不需要减少齿轮。音高调整选项提高了驱动单元的定位精度和线性运动应用中线性速度的控制。
The standard linear pitch adjustment control on the Uhing RG drive is a lever which is manually moved to a notched setting on a scale. Each notch increases or decreases pitch by 0.01. There are 100 discrete notched settings on the scale which enable a 10:1 turndown of the linear pitch of the drive unit. For example, if the drive is set up with a maximum pitch of 0.25 inches, the operator may use the pitch control lever to turn down the pitch to 0.02 inches.
The new pitch control option bypasses the notched settings on the scale by using a worm gear and threaded rod design. To change linear pitch, the operator turns a control knob on the end of the threaded rod. This may be done safely while the drive is operating — there is no need to stop the system or adjust any other controls. A pitch indicator moves along the scale as the control knob is turned.
Whereas the standard control lever limits pitch adjustability to the notched settings on the scale, the worm gear option permits virtually infinitely adjustable pitch throughout the 10:1 adjustable pitch range. This fine tuning capability means the operator has more accurate control over the drive unit’s linear position along the travel path.
只需转动控制旋钮就会增加或减小Uhing驱动器单元的线性音高，从而有效地改变了驱动器的线性速度。该机制纯粹是机械的，在Uhing驱动器的设计中固有。这为操作员和设计人员提供了不需要离合器，凸轮或齿轮的可变速度线性驱动系统。一旦线性音高设置在Uhing驱动器上，它将保持恒定 - 无论驱动式电动机速度或其他控制设置如何。新的音高控制选项也可以改装为现有的Uhing线性驱动器设置。
Amacoil
www.amacoil.com
Filed Under:Linear Motion Tips
