Molex Incorporatedcontinues to build on its innovative family of power products with the Mega-Fit power connector. This wire-to-board, mid-range product line fills a significant power void in today’s interconnect marketplace by delivering 23.0A in a small 5.70mm footprint. The compact design paired with the high current terminals provide one of the most power dense connectors in the industry. These feature-rich connectors are ideal for applications requiring power from 14.0 to 23.0A per terminal across multiple industries including consumer/home appliance; networking and telecommunications; industrial and commercial vehicle.
由于电源互连的批判性质和安全要求，Mega-Fit连接器的终端接口和压接段将先进技术集成到下一代的电源连接器中。拆分框端子设计滞留了六个接触点，每个接触点都独立移动在单独的柔性梁上，以提供长期可靠性的冗余次级电流路径。交错的接触允许前四个“牺牲”触点在未交配时保护两个后方的接触点，从而使系统以48V/23.0A的“热插”和最多30个周期“热插”。终端还具有扩展的枪管导体压接，可提供极强的终端对线保持，可提供长期耐用性和可靠性。
Mega-Fit 5.70mm螺距连接器还保持了Molex Power产品的高级产品线中发现的许多相同特性，包括孤立的终端，正壳锁和偏光壳。
Numerous applications would benefit from the Mega-Fit 5.70mm pitch connectors, including;
- Power delivery requirements between 14.0 and 23.0A: Many general market mid-range power connectors are rated below 14.0A. The Mega-Fit system not only provides power delivery in the higher range, but it does so in a compact size, allowing more power without sacrificing PCB space.
- When low power applications benefit from “power headroom”: Mega-Fit power connectors can also be used when additional current carrying capacity is preferred rather than using the maximum power on a smaller connector.
- 为了替换用于当前共享的低功率连接器：在某些应用中，设计工程师可以引入当前共享，或在与较低电源连接器的触点之间分解功率，以达到最高23.0A。但是，使用Mega-Fit电源连接器使用一条当前路径不仅更安全，而且还可以减少PCB足迹。
Molex Incorporated
www.molex.com/link/megafit.html
The postMolex的高电流密度大型拟合电源连接器appeared first on连接器提示。
提交以下：连接器提示，，，，Connectors (electrical) • crimp technologies
